BREAST FORMS

All our realistic prosthetic breast forms are
fully filled-in odorless breast forms. They are
multi-layered silicone gel forms. Unlike most
other breast forms, they do not have latex or
polyurethane shell and are made using unique
multilayered different softness process. Outer
layers are tougher to provide durability, but still
softer than polyurethane or latex breast forms.
You can still tear our silicone breast forms
exposing softer gel layers, but they will not leak.
Temperature, puncturing, swimming not an issue.
ISO 10993-10 Certified Skin Safe

Our forms do not change depending on the
frame. They are made to fit most. Your look
will depend on your band size, height and
other measurements. Since there are many
different needs and frame variations, we
always encourage customers to visit our breast
form SizeChart for measurements. Our realistic
breast form nipples are not detachable and are
included in all protrusion measurements.
While our C forms are teardrop, D forms are more round and perky.
They have a small base. Our D forms are much larger than C and are
about double the size in weight. D forms are heavy and soft and their
weight will pull. Due to the weight of D forms, you will need some bra
support even when you use medical adhesives.

All our forms contour for most realistic look
and feel. Our 0.5in (13mm) back of the forms is
very gradual, virtually flat back. 1.5in (38mm)
fitting is much more curved-in and designed to
accommodate larger natural breast sizes. 1.5in
(38mm) fitting is much more concave, and for
small natural sizes is not suitable. Breast forms
are soft and 1.5in (38mm) back can be used.
However, if natural size is small and does not
fill the back curve completely, the forms will be flattened resulting in less
volume and protrusion. Also 1.5in (38mm) form weight is less than 0.5in
(13mm) back breast forms. If not sure about the fitting, 0.5in back is
recommended, most popular and versatile.

Our breast forms are fully filled-in 100% silicone gel forms, no polyurethane, no latex, no liquid. Since our breast forms do not have liquid inside, they are durable and washable. Temperature, puncturing, swimming and other activities are not an issue. There are no special care instructions for the forms. Just treat them as though they were your real breasts and they will last. Our breast prosthesis can be washed in any temperature water with any soap or shampoo. After washing for soft skin feel you can apply baby or starch powder to the top of the forms and leave the back crispy clean for better adhesion and placement. You can swim in the pool or ocean with our forms. Pool water (chlorine) and saltwater will not alter their color or shape. You can sleep with the forms, but it is not recommended since you should let your skin rest. You can wear under wire bras with the forms and for jogging or exercising sports bra is recommended. Transparent, see-through or sheer bras compliment our breast forms well.Top part of the forms should be turned slightly toward the armpits in such a way that the forms hug your chest muscle allowing for a seamless fit.

Our breast forms take powder makeup
well and can be blended nicely to match your
natural skin tone better. Usually, if not sure
about the color, lighter shade is recommended.
Since our Chocolate forms are very deep in
color, makeup will not alter chocolate form
color. Liquid makeup is not suggested. Powder
eye shadow makeup works well. Wash breast
forms, apply makeup with a large brush and
rub it in with your fingers. Repeat the process until you get the color
you like. For less dramatic change you can use any loose face powder of
darker shade and if you need to add some redness to the color any blush
will do the job. You can use liquid makeup. However, it is more difficult
to apply. Panstick works well, but is harder to clean. You can use alcohol
cleansing wipes or rubbing alcohol for better results. Some of the
makeup may get absorbed. Generally, with hot water and soap you
should be able to wash the makeup off. You can use a soft sponge as well.
However, there are no guarantees.

Our realistic breast forms are fully filled-in multi-layered silicone gel. For durability outer layers are tougher and get softer as you go deeper. Our forms do not have liquid inside and will not leak. You can still tear the forms exposing softer gel layers. If you use strong medical adhesives, use adhesive removers as well. There are many different ways of attaching prosthetic breast forms with adhesives. Some of our customers apply adhesives on the forms and let dry partially, then attach the forms. Follow all of your adhesive manufacturer's directions. Our breast forms get softer as you go deeper and inside gel is very sticky (tacky). If you use silicone adhesive removers, they interact with the surface and may expose soft and tacky silicone gel. The stronger the remover, the faster it will wear. If the gel gets exposed, you can use baby or starch powder to manage the tackiness, but the surface will no longer be the same. Basically the idea is to remove just as much as you added with strong silicone adhesives. Do not leave adhesive removers on breast forms for an extended time. Use care when removing, the forms are soft. Due to the weight of our D forms, you will need some bra support even when you use medical adhesives. Usually, for any silicone prosthetics, polyurethane or latex adhesive will not adhere. Adhesives made for silicone will bond with silicone adding to the forms and removers will interact with silicone to remove. Generally, if you use adhesives for any silicone prosthetics, they will interact with silicone and may change the surface resulting in faster wear.

Our breast forms are odorless multi-layered
quality silicone gel forms. Unlike most other
forms, they do not have latex or polyurethane
shell and are fully filled-in 100% silicone gel,
no polyurethane, no latex. Our realistic breast
forms are hypoallergenic or non allergenic for
people with latex or polyurethane intolerance.
ISO 10993-10 Certified Skin Safe
Our prosthetic breast forms do not have
conventional shell or skin. They do not have
any liquid inside and are made using unique multilayered different
softness silicone process. Outer layers are tougher to provide durability,
but still softer than polyurethane or latex.